Pattern: Very Baby Diaper Pattern
These photos and instructions were put together by Cindy at Shannyn’s Harvest - thank you Cindy!
Step One: Cut out your pattern pieces just as you would to make a diaper. However add an extra 1/4 - 1/2 all the way around your pattern. Use print or solid polyurethane laminate outer and a microfleece or suedecloth inner layer. Use the same elastic anchor points but move them out towards the new edge so they are the same distance from the edge as they are on the diaper pattern.
Step Two: Apply the elastic either to just one inside layer, or to both using the blind method. Apply your snaps just like the pattern directs, though you’ll want to move them out a bit to line up with the new edge. Add two snaps about an inch apart to the back if you plan on using a Mini Diaper with your new pul shell.
All Done!
mjandbjplus3 says:
I am as green at sewing as can be. I am actually going to have my mother teach me how to sew, just so I can sew my own cloth diaper covers. Does anyone have any suggestions on how to begin? I have no idea where to start. What fabric, what thread, how I’m supposed to do it, etc. Any advice from experienced sewers would be greatly appreciated. Also, it seems like it would cost less to sew your own but what is the usual cost after you have purchased all your material and accessories per cover?
February 4th, 2009 at 8:15 am
Jessica says:
You’ll probably get more help and advice by signing up and posting your questions over at http://www.sewdiapers.com ;o)
February 4th, 2009 at 10:33 am